EasyManuals Logo

Canon imagePROGRAF iPF820 User Manual

Canon imagePROGRAF iPF820
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #235 background imageLoading...
Page #235 background image
Choosing Paper for Printing
Selecting the Paper T ype (Roll)
When changing the type of paper after the paper has been advanced, specify the type of paper as follows.
Important
For best printing results, the printer ne-tunes the feed amount for each type of paper . Be sure to select
the type of paper to use correctly before printing.
Because the printer ne-tunes the feed amount for each type of paper , the margins and the size of
printed images may vary depending on the type of paper used. If margins and the size of images are not
as you expected, adjust the paper feed amount and Printhead height.
( P .552)
( P .551)
Note
After you load the roll, the printer automatically shows a menu for selection of the paper type on
the Display Screen , unless a barcode has been printed on the roll or you have activated automatic
monitoring of the remaining roll paper . Select the type of paper , and then press the OK button.
If no barcode has been printed on the roll and you have activated automatic monitoring of the remaining
roll paper , specify the roll length after the paper type. ( P .1 14)
1. Press the Menu button to display MAIN MENU .
2. Press or to select Media Menu , and then press the button.
3. Press or to select Roll1(Uppr) T ype or Roll2 (Lwr) T ype , and then press the button.
4. Press or to select the type of paper loaded in the printer , and then press the OK button.
Note
For details on types of paper , see the Paper Reference Guide . ( P .104) By default, Plain Paper
is selected.
If you move the Release Lever , the setting automatically reverts to the previously selected paper .
Be sure to select the correct paper type. If this setting does not match the loaded paper , it may
cause feed errors and af fect printing quality .
If automatic monitoring of the remaining roll is deactivated ( Off is selected) and you have selected a
type of paper for which width detection is deactivated ( Off is selected), you must advance the paper
manually to the position for printing. ( P .153)
5. Press the Online button to bring the printer online.
Enhanced Printing Options 221

Table of Contents

Other manuals for Canon imagePROGRAF iPF820

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF820 and is the answer not in the manual?

Canon imagePROGRAF iPF820 Specifications

General IconGeneral
BrandCanon
ModelimagePROGRAF iPF820
CategoryPrinter
LanguageEnglish

Related product manuals