Control Panel
GL2 Settings
Setting Item Description, Instructions
Monochrome Print in monochrome.
Color (CAD) 1 * Print in standard colors.
Color (CAD) 2 Print in brighter colors.
Color (CAD) 3 Print emulating the Canon BJ-W3000/W3050, in colors
resembling colors produced by these printers.( *1 )
Color (CAD) 4 Print emulating the HP Designjet 500/800, in colors resembling
colors produced by these printers.( *1 )
Color (CAD) 5 Print emulating the HP Designjet 1000, in colors resembling
colors produced by these printers.( *1 )
Color Mode
Color (CAD) 6 Print emulating the HP Designjet 4000/4500, in colors resembling
colors produced by these printers.( *1 )
Print Quality Choose the print quality .
Print (Economy) Although printing quality is diminished, less ink is consumed than
in regular printing. Select On to conserve ink.
Input Resolution Choose the printer input resolution, 600dpi or 300dpi .
Paper Source Choose the source of paper for HP-GL/2 printing.
Conserve Paper Conserves paper when printing.
Line Cap Choose the shape of the end point, determined by Software
or Rounded .
• If you choose Software
Operation is determined by the application. If nothing is
specied by the application, the result is as shown in the
gure.
• If you choose Rounded
Smoothing Choose whether to print arcs as smooth curved lines or as
multiple connected line segments.
• If you choose Software
Operation is determined by the application. If nothing is
specied by the application, the result is as shown in the
gure.
Note: By default, this is a 72-sided gure
58 Printer Parts
To Next Page
Loading...
Need help?
General