Printing CAD Drawings
HP-GL/2 Printing
This printer supports the GARO language as well as HP-GL/2 and HP R TL ( *1 ) emulation. *2 ) When printing
from applications that support HP-GL/2 output, specify HP-GL/2 in the application’ s plotter output settings.
Note
• For instructions on conguring these settings, refer to the software documentation.
The printer automatically switches to the corresponding processing when GARO, HP-GL/2, or HP R TL jobs
are received. Congure the settings especially for HP-GL/2 emulation on the printer control panel. ( → P .53)
This printer can emulate the following printers.
Emulated Printers
Canon W3000 and W3050 ( *3 )
Hewlett-Packard Designjet 450c, Designjet 750c Plus, and Designjet 750c
*1: HP-GL/2 : Hewlett-Packard Graphics Language 2; HP R TL: Hewlett-Packard Raster T ransfer Language
*2: It may not be possible to print jobs with excessively large amounts of data correctly .
*3: Layout templates are not supported.
190 W orking With V arious Print Jobs
To Next Page
Loading...
Need help?
General