Control Panel
Paper Menu
Setting Item Description, Instructions
Cut Sheet T ype ( *1 ) Choose the type of sheets.
( → P .149)
Roll1(Uppr) T ype ( *1 )
Roll2 (Lwr) T ype ( *1 )
Choose the type of roll.
( → P .1 13)
Roll1(Uppr)Lngth
Roll2(Lwr) Lngth
Displayed if ManageRemainRoll is On .
If a barcode is not printed on rolls, specify the roll length. The roll length is
displayed in meters or feet, depending on the setting in Length Unit .
ManageRemainRoll Choose On to print a barcode at the end of a roll before you remove it. The
printed barcode can be used in managing the amount of roll paper left. Choose
Off if you prefer not to print the barcode.
( → P .136)
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide .
( → P .104) The types of paper indicated in the printer driver and related software (as well as on the
Control Panel ) are updated when you install the printer driver from the User Software CD-ROM or if
you change paper information by using the Media Conguration T ool . (See Media Conguration T ool
Guide (Windows) or Media Conguration T ool Guide (Macintosh).)
54 Printer Parts
To Next Page
Loading...
