Handling sheets for paper feed slots
Loading Sheets in the Printer
Note
• For details on supported types and sizes of paper , see “Paper Sizes” or the Paper Reference Guide .
( → P .109) ( → P .104)
• If the Platen is dirty , clean inside the T op Cover before loading paper . ( → P .597)
• After pressing the Load/Eject button, you can refer to instructions on the Display Screen as you load
the paper . ( → P .76)
1. If you send a print job from a computer beforehand, the type and size of paper are shown on the
Display Screen . Lift the Release Lever and open the T op Cover .
Important
• Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink T ube Stabilizer (c). T ouching these
parts may damage them.
150 Handling Paper
To Next Page
Loading...
Need help?
General