Handling rolls
Feeding Roll Paper Manually
When the printer is of ine, you can advance or retract the roll on the Platen by pressing ▲ or ▼ .
1. Press the Online button to bring the printer of ine.
2. Conrm that a roll is selected as the paper source. ( → P .1 12)
3. Press the ▲ or ▼ button to advance or retract the roll.
Press ▲ to retract the roll manually .
Press ▼ to advance the roll manually .
Note
• Holding down ▲ or ▼ for less than a second moves the roll about 1 mm (0.04 in).
Holding down ▲ or ▼ for more than a second moves the roll until you release the button. Release the
button when the Display Screen indicates End of paper feed. Cannot feed paper more. .
Handling Paper 135
To Next Page
Loading...
Need help?
General