Canon imagePROGRAF iPF820 - Using the Wheeled Output Stacker

Output Stacker
Using the Wheeled Output Stacker
Positioning the Wheeled Output Stacker by the printer will prevent rolls from dropping on the oor after printing.
The stacker is equipped with casters to facilitate moving it.
Important
• The Output Stacker can accommodate one sheet. When printing multiple pages, remove each sheet
after it is printed.
Positioning the Wheeled Output Stacker by the printer
1. Holding the Output Stacker Ejection Guides (a), move the stacker between the printer Stand .
2. Lock the casters.
Handling Paper 159