Messages regarding printing or adjusment
Borderless printng not possible. Paper stretched or
shrank.
Cause Corrective Action
Hold down the Stop button for a second or more to
cancel printing.
The loaded roll has expanded or contracted due to
environmental conditions, making it wider or narrower
than the supported width for borderless printing.
Use each type of paper only where the recommended
environmental conditions are met. For details on
environmental conditions for various paper , see the
Paper Reference Guide .
( → P .104)
Before borderless printing, move the blue platen switch.
Cause Corrective Action
The blue Switch on the platen was set to the side
opposite ● when a borderless print job was received.
Before borderless printing, set the blue Switch on the
platen to the ● side.
( → P .629)
Blue platen switch is dirty .
Cause Corrective Action
The blue Switch on the platen is dirty . Open the T op Cover and clean the blue Switch on
the platen.
( → P .597)
Error Message 667
To Next Page
Loading...
Need help?
General