Cleaning the Printer
Cleaning the Printer
Cleaning the Printer Exterior
Clean the printer regularly to maintain better printing quality and help prevent problems.
About once a month, clean the printer exterior .
1. T urn the printer of f. ( → P .25)
2. Unplug the power cord from the outlet.
Caution
• Always turn of f the printer and unplug the power cord before cleaning or maintenance. Accidentally
leaving the printer on poses a risk of injury if you touch moving parts inside the printer .
3. Using a damp cloth that you have wrung out completely , wipe away any dirt or paper dust from
the Paper Feed Slot (a), power cord plug, and so on. Dry these parts with a dry cloth.
Caution
• Never use ammable solvents such as alcohol, benzene, or thinner . If these substances come into
contact with electrical components inside the printer , there is a risk of re or electrical shock.
Important
• If the Ejection Guide is dirty , it may soil the edge of the paper when the paper is cut. W e recommend
cleaning the Ejection Guide even if it does not appear dirty , because it may actually be covered
with paper dust.
( → P .597)
4. Plug the power cord into the outlet.
596 Maintenance
To Next Page
Loading...
Need help?
General