Other useful settings
Cutting Roll Paper After Printing (Mac OS X)
This topic describes how to cut roll paper automatically (using the auto cut function) after printing, as well as
how to print a cut line for manual cutting.
Note
• The auto cut function is activated on the printer by default and when the printer driver is installed.
Follow the steps below to reactivate the function once disabled, or to select the setting for printing a
cut line instead.
1. Choose Page Setup in the application menu to display the Page Attributes dialog box.
2. Select the printer in the B Format for list.
3. Choose the original size in the C Paper Size list.
4. Click F OK to close the dialog box.
5. Choose Print in the application menu.
6. Access the Page Setup pane.
7. In the A Paper Source list, click to select the feed method set for the specied paper . In this
case, select from Roll Paper (Auto) , Roll Paper 1 , or Roll Paper 2 .
368 Enhanced Printing Options
To Next Page
Loading...
Need help?
General