Responding to Messages
Error Messages
Error messages
Check the message and take the appropriate action.
• Before borderless printing, move the blue platen switch. (→P .667)
• Blue platen switch is dirty . (→P .667)
• Borderless printng not possible. (→P .660)
• Borderless printng not possible. Paper stretched or shrank. (→P .667)
• Cannot adjust band. (→P .666)
• Cannot adjust printhead. (→P .666)
• Cannot print as selected. Another roll is in use. (→P .653)
• Cannot print as specied. (→P .665)
• Close Ink T ank Cover (→P .662)
• End of paper feed. (→P .659)
• ERROR Exxx-xxxx (x represents a letter or number) (→P .674)
• File read error . (→P .671)
• GARO Wxxxx (x represents a number) (→P .674)
• GL2: W0502 The parameter is out of range. (→P .673)
• GL2: W0504 This command is not supported. (→P .673)
• GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) (→P .673)
• Hard disk error . (→P .671)
• Hardware error . xxxxxxxx-xxxx (x represents a letter or number) (→P .674)
• Ink insufcient. (→P .662)
• No ink left. (→P .662)
• Ink tank is empty . (→P .663)
• Insert the maintenance cartridge. (→P .670)
• Insufcient paper for job (→P .653)
• Mail box full. Now printing without saving data. (→P .671)
• Mail box nearly full. (→P .671)
• Maintenance cartridge full. (→P .670)
• Maintenance cartridge problem. (→P .670)
• Maximum jobs stored. (→P .672)
• Multi-sensor error (→P .675)
• No ink tank loaded. (→P .663)
• No Maintenance Cartridge capacity . (→P .670)
• No printhead (→P .669)
• No Roll Unit. (→P .656)
• Not much ink is left. (→P .663)
• Paper cutting failed. (→P .659)
• Paper jam. (→P .657)
• Paper loaded askew . (→P .658)
• Paper size not detected. (→P .652)
• Papr T ype Mismatch (→P .650)
• PaprT ypeMismatch (→P .650)
• Parts replacement time has passed. (→P .675)
• PHead needs cleaning. (→P .669)
• Prepare for maint cart replacement. (→P .670)
• Prepare for parts replacement. (→P .675)
648 Error Message
To Next Page
Loading...
Need help?
General