Responding to Messages
• Printhead error (→P .669)
• Problem with Printhead (→P .669)
• Regular printing is selected, but a roll is loaded. (→P .656)
• Rel lever is in wrong position. (→P .659)
• Roll feed unit error . (→P .660)
• Roll printing is selected, but sheets are loaded. (→P .654)
• Roll printing is selected. (→P .654)
• Roll x jam (x is 1 (Upper) or 2 (Lower)) (→P .657)
• RollWdthMismatch (→P .651)
• Sheet printing is selected. (→P .656)
• Sheet removed. (→P .656)
• The mail box is full. (→P .671)
• The paper is too small. (→P .651)
• The roll feed unit is loose. (→P .661)
• Roll x is empty . (x is 1 (Upper) or 2 (Lower)) (→P .655)
• This paper cannot be used. (→P .653)
• This type of paper is not compatible with HP-GL/2. (→P .673)
• T oo many jobs for mail box. (→P .672)
• T op cover is open. (→P .674)
• Unknown le. (→P .675)
• Use another paper . (→P .665)
• W rong ink tank. (→P .663)
• W rong maintenance cartridge. (→P .670)
• W rong printhead. (→P .669)
Other Messages
These messages do not prevent printer operation. Check the information on the Display Screen and take
action as necessary . Messages requiring special attention are as follows:
• Remaining level of the ink cannot be correctly detected. (→P .662)
Error Message 649
To Next Page
Loading...
Need help?
General