Ink T anks
4. Lift the Ink T ank Lock Lever until it stops, and then push it down until it clicks into place.
5. Make sure the Ink Lamp is lit in red.
Note
• If the Ink Lamp is not lit in red, reload the tank.
• Ink lamps ash when there is little ink left.
6. Close the Ink T ank Cover .
The printer will go online or of ine.
Important
• After Ink T ank replacement, always close the Ink T ank Cover . If the Ink T ank Cover cannot close,
some Ink T ank Lock Lever may not be closed completely . Make sure all ink tank lock levers are
fully closed.
570 Maintenance
To Next Page
Loading...
Need help?
General