Handling rolls
Paper Cutting (to have the roll cut at your specied position)
1. After pressing the Online button to bring the printer of ine, press ▲ or ▼ to advance the roll
paper to the position for cutting.
2. Press the Menu button to display MAIN MENU .
3. Press ▲ or ▼ to select Paper Cutting , and then press the ► button.
4. Press ▲ or ▼ to select Y es , and then press the OK button.
After the roll paper is cut, it is rewound automatically .
Caution
• If paper would be short when cut at a particular position, the roll may automatically be advanced in
some cases before cutting.
142 Handling Paper
To Next Page
Loading...
