Handling sheets for paper feed slots
5. Hold the paper and pull it out, toward the front.
Note
• If you do not nd any scraps or jams, see “T roubleshooting When Paper Jams are not Found”.
(→P .615)
6. If the Carriage is on the left, move the Carriage to the right until it stops.
Important
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may
occur when you turn on the printer .
7. Lower the Release Lever and close the T op Cover .
8. T urn the printer on. ( → P .25 )
Handling Paper 157