Printing at full size
8. In the A Media T ype list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper .
9. Make your selection in the E Print T arget list.
10. Access the Page Setup pane.
1 1. In the A Paper Source list, click to select the feed method set for the specied paper . In this
case, select from Roll Paper (Auto) , Roll Paper 1 , or Roll Paper 2 .
12. Conrm that the roll paper width matches the paper size.
Make sure the width of the loaded roll is displayed in the B Roll Paper W idth list-in this case, 10
in. (254.0mm) .
Note
• If the width of the roll loaded in the printer is not shown in B Roll Paper W idth , click L Printer
Information on the Main pane to update the printer information.
Enhanced Printing Options 263
To Next Page
Loading...
Need help?
General