Printer parts
j. Release Lever
Releases the Paper Retainer . Lift this lever toward the front of the printer when loading paper .
k. Maintenance Cartridge
Ink used for maintenance purposes such as head cleaning is absorbed. (Replace the cartridge
when it is full.)
l. Carrying Handles
When carrying the printer , have six people hold it by these handles under both sides.
m. Maintenance Cartridge Cover
Open this cover to replace the Maintenance Cartridge .
n. Stand
A stand that holds the printer . Equipped with casters to facilitate moving it.
o. Stand L
The left leg of the Stand .
p. Stand R
The right leg of the Stand .
q. Leg Covers
Covers for Stand L and Stand R .
r . Stopper
Locks the Stand casters.
Always release the Stopper before moving the printer . Moving the printer while the Stopper is locked
may scratch the casters or the oor .
s. Roll Unit
A unit for loading two rolls.
t. Roll Unit Lever
Hold this lever to pull out the Roll Unit .
14 Printer Parts
To Next Page
Loading...
Need help?
General