Printing banners or at other non-standard sizes
8. Select the C Enlarged/Reduced Printing check box.
Note
• If the Enlarged/Reduced Printing check box is not displayed on the Page Setup sheet, clear the
B Borderless Printing check box.
9. In the L Paper Source list, click to select the feed method set for the specied paper . In this
case, choose from Roll Paper (Auto) , Roll Paper 1 , or Roll Paper 2 .
10. After you click E Fit Roll Paper W idth , the Information dialog box is displayed.
1 1. Select the width of the loaded roll in the Roll Paper W idth list. In this case, click 16-in. Roll
(406.4mm) , and then click OK .
Enhanced Printing Options 291
To Next Page
Loading...
