Conserving roll paper
Conserving Roll Paper by Printing Originals W ithout T op
and Bottom Margins (W indows)
This topic describes how to conserve roll paper when printing originals that have a top and bottom margin,
based on the following example.
• Document: Any T ype
• Page size: A4 (210.0×297.0 mm [8.3×1 1.7 in])/Letter
• Paper: Roll
• Paper type: Plain Paper
• Roll paper width: A3/A4 roll (297.0 mm [1 1.7 in.])
1. Choose Print in the application menu.
2. Select the printer in the dialog box, and then display the printer driver dialog box. ( → P .381)
3. Make sure the Main sheet is displayed.
4. In the A Media T ype list, select the type of paper that is loaded. In this case, click Plain Paper .
5. Click the Page Setup tab to display the Page Setup sheet.
6. In the A Page Size list, click the size of the original as specied in the application. In this
case, click ISO A4 .
7. In the L Paper Source list, click to select the feed method set for the specied paper . In this
case, choose from Roll Paper (Auto) , Roll Paper 1 , or Roll Paper 2 .
342 Enhanced Printing Options
To Next Page
Loading...
