Other Maintenance
1. Remove the Wheeled Output Stacker from the printer .
( → P .159)
2. Remove the paper .
• Rolls ( → P .125)
• Sheets ( → P .155)
3. Press the Menu button to display MAIN MENU .
4. Press ▲ or ▼ to select Maintenance , and then press the ► button.
5. Press ▲ or ▼ to select Move Printer , and then press the ► button.
6. Press ▲ or ▼ to select the level of transfer , and then press the OK button.
7. After the message Always contact service before preparing to move the printer . is shown
on the Display Screen , press the OK button.
The Display Screen indicates Please W ait.. .
• If you have selected Level 1 in step 6, after processing in preparation to move the printer is nished,
the message Finished preparing to move printer . T urn off printer . is shown on the Display
Screen . Go to step 15.
• When you are nished preparing to transfer the printer after selecting Level 2 or Level 3 conditions,
the Display Screen requests you to open the Ink T ank Cover . Follow the procedure starting with
step 8.
Important
• If consumables must be replaced, the message Consumables must be replaced. Call for service.
is shown on the Display Screen and preparation is not possible. If this message is displayed, press
the OK button and contact your Canon dealer for assistance.
8. Open the Ink T ank Cover .
602 Maintenance
To Next Page
Loading...
Need help?
General