Canon iPF6100 - Page 659

Chapter 8
8-11
Hardware error.
03130031-2E14
Turn off printer,
wait, then
turn on again.
03130031-2F14 Writing to the ASIC register disabled Replace the main controller PCB
Hardware error.
03130031-2E16
Turn off printer,
wait, then
turn on again.
03130031-2F16 Mist fan error Check the mist fan.
Hardware error.
03130031-2E17
Turn off printer,
wait, then
turn on again.
03130031-2F17 Suction fan lock detection error Check the suction fan.
Hardware error.
03130031-2E20
Turn off printer,
wait, then
turn on again.
03130031-2F20 Pump motor cam position error Check the purge unit.
Hardware error.
03130031-2E22
Turn off printer,
wait, then
turn on again.
03130031-2F22 Pump travel timeout Check the purge unit.
Hardware error.
03130031-2E23
Turn off printer,
wait, then
turn on again.
03130031-2F23 Pump motor error
Pump inoperable
Check the purge unit.
Hardware error.
03130031-2E24
Turn off printer,
wait, then
turn on again.
03130031-2F24 Cutter travel timeout Check the cutter unit.
Hardware error.
03130031-2E25
Turn off printer,
wait, then
turn on again.
03130031-2F25 Unable to detect the carriage motor
home position
Check the carriage unit. Check the linear encoder for
smears.
Hardware error.
03130031-2E26
Turn off printer,
wait, then
turn on again.
03130031-2F26 Carriage inoperable Check the carriage unit and surrounding parts.
Hardware error.
03130031-2E27
Turn off printer,
wait, then
turn on again.
03130031-2F27 Carriage travel timeout Check the carriage unit and surrounding parts.
Hardware error.
03130031-2E17
Turn off printer,
wait, then
turn on again.
03130031-2F17 Pump encoder sensor error Check the purge unit.
Hardware error.
03130031-2E2A
Turn off printer,
wait, then
turn on again.
03130031-2F2A Unable to detect the feed roller home
position
Check the feed roller encoder and surrounding part.
Check to see if paper has not jammed.
Hardware error.
03130031-2E29
Turn off printer,
wait, then
turn on again.
03030000-2F29 Feed motor timeout (Roll media) Check the roll feed unit. Check roll media. Check to
see if paper has not jammed in the printer.
Hardware error.
03130031-2E2E
Turn off printer,
wait, then
turn on again.
03130031-2F2E Roll travel timeout Check the roll feed unit.
Display massage Code* Condition detected Action