168
S420 External I/O controller has failed [crit]
S490 Imaging system error [crit]
Audio Server Error
B301 Audio device error [err]
B402 Audio server initialization failed [crit]
B403 Settings change failed [crit]
Camera Application Error
C301 Day/Night mode switching error [err]
Video Error
V300 Video input error [err]
V320 Internal error in intelligent service [err]
Description external io controller is broken.(S420)
Meaning The external I/O controller has failed.
Countermeasure The external I/O controller firmware
must be updated. If the problem
persists after updating the firmware,
the camera could be faulty. Contact a
Canon’s sales/service representative.
Description input1: [%1] time asserted: code [%2]
(S490)
%1 Number of detection
%2 Cause of error
Meaning Images may not have been captured
correctly.
Countermeasure If the problem persists, the camera
could be faulty. Contact a Canon’s
sales/service representative.
Description cannot use audio device for
%1[%2:%3] (B301)
%1 Send/Receive type (rx | tx)
%2 Error handling (open | write | flush)
%3 Error number
Meaning Detected an error in the audio device
Countermeasure If the problem persists, contact a
Canon’s sales/service representative.
Description wvaudio initialization error [%1] (B402)
%1 Error number
Meaning The audio server could not be
initialized. The audio server stops.
Countermeasure If the problem persists after rebooting,
the camera could be faulty. Contact a
Canon’s sales/service representative.
Description cannot set config [%1:%2] (B403)
%1 Error serial number
%2 Error number
Meaning The settings could not be updated.
The audio server stops.
Countermeasure If the problem persists after rebooting,
the camera could be faulty. Contact a
Canon’s sales/service representative.
Description Detect IRCF error %1 (C301)
%1 Error number
Meaning An error occurred while switching the
Day/Night mode (during the insertion
or the removal of infrared cut filter).
Countermeasure If the problem persists after rebooting,
the camera could be faulty. Contact a
Canon’s sales/service representative.
Description video %1 warning - %2 (V300)
%1 Video number
%2 Error number
Meaning An error in the video input was
detected that may adversely affect the
operation of the camera.
Countermeasure If the problem persists after rebooting,
the camera could be faulty. Contact a
Canon’s sales/service representative.
Description cannot work intelligent [%1][%2][%3].
(V320)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in intelligent
service.
Countermeasure If the problem persists after rebooting,
the camera could be faulty. Contact a
Canon’s sales/service representative.
To Next Page
Loading...
