© Cesab 10 – 10 T Code(s): 841, 842, 843
Repair manual: Electric drive motor 1700 Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
10.8 Cleaning
Keep the motor as clean as possible since this is a decisive factor for correct
operation. Regularly inspect the motor and motor compartment for build-up
of dust, oil and other contaminants.
Dirty and/or greasy components should be cleaned with a rag moistened with
solvent. Use a rag of lint-free cloth material. Do not use too much solvent as
it could penetrate into the motor parts.
After cleaning, dry the components thoroughly. The easiest way is by heating.
Note:
Windings and insulation must not be heated over 125°C and not for longer
than 6 hours.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
