© Cesab 6 – 7 T Code(s): 841, 842, 843
Repair manual: Installation and commissioning Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
6.6.1 PIN code defaults
The PIN codes are factory set so that only block 1/operator profiles 1-10 are
activated. Note: It is only possible to assign one digit to an operator profile. The
operator profile 10 should be set to 0 (zero).
Block 10 and operator profile 1 are only used for PIN code programming for truck
reset after collision, the remaining operator profiles in block 10 are not used.
Note:
Service personnel are urged to keep notes on activated blocks, changed
PIN codes and special operator profile settings.
The factory-set operator profiles are classified as follows:
Default assignment of PIN codes
Operator
profile
no.
1 2 3 4 5 6 7 8 9
10
Note:
Entered
as 0
Block 0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Block 1 1258 2258 3258 0000 0000 0000 0000 0000 9258 0000
Block 2 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Block 3 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Block 4 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Block 5 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Block 6 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Block 7 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Block 8 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Block 9 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Block 10 0000
Profile Characteristic Remarks
1 Standard profile
Transport PIN code for all trucks, as indicated on the transport
sticker (1258)
2 Beginner profile Factory pre-set PIN code at the time of delivery (2258).
3 Advanced profile
Factory pre-set PIN code at the time of delivery (3258). Operator
parameters set to max. values
4 Standard profile –
5 Standard profile –
6 Standard profile –
7 Standard profile –
8 Standard profile –
9 Standard profile
Factory pre-set PIN code at the time of delivery (9258), only for
automatic trucks.
10 Standard profile –
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
