CESAB S210 - Parameter 304 - EVP support arm lowering speed; Parameter 305 - EVP slow lowering speed; Parameter 306 - Activation of “Click-2-Creep” lifting;lowering

© Cesab 5 – 23 T Code(s): 841, 842, 843
Repair manual: Parameters Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
Parameter 304 - EVP support arm lowering speed
Applies to S208L, 210, 212S, 212L, 212, 214L, 214, 220D
Parameter 304 - EVP support arm lowering speed
Specifies the lowering speed of the support arms. This parameter can be
adjusted manually or can be set by using the calibration function
Parameter 305 - EVP slow lowering speed
Applies to S208L, 210, 212S, 212L, 212, 214L, 214, 220D
Parameter 305 - EVP slow lowering speed
Determines the slow lowering speed when using "Click-2-Creep”. This
parameter can be adjusted manually or can be set by using the calibration
function
Parameter 306 - Activation of “Click-2-Creep” lifting/lowering
Applies to S208L, 210, 212S, 212L, 212, 214L, 214, 220D
Parameter 306 - Activation of “Click-2-Creep” lifting/lowering
Activate “Click-2-Creep” lifting/lowering
Par. Description Min.
Defa
ult
Max.
Incre
ment
Unit
304
EVP support arms,
lowering speed
50 130 220 5
Par. Description Min.
Defa
ult
Max.
Incre
ment
Unit
305
EVP slow lowering speed
40 105 220 5
Par. Description Min.
Defa
ult
Max.
Incre
ment
Unit
306
Activate “Click-2-Creep”
lifting/lowering
0 1 1 1
Value Function
0 OFF
1 On:
https://www.forkliftpdfmanuals.com/