CESAB S210 User Manual

© Cesab 16 – 9 T Code(s): 841, 842, 843
Repair manual: Mast C7000 Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
Damaged plates
If a plate has broken on the chain, this may be due to overloading or
corrosion.
Replace the chain.
Damaged bolts
It can be difficult to determine whether a bolt has broken. It can appear as bolt
rotation and/or that the outer plate is loose.
Replace the chain.
Dirty chain
If a chain is very dirty replacement is recommended first and foremost. It can
also be removed and cleaned as set out in the chapter “Cleaning”.
16.3.4 Cleaning
We recommend you to replace a chain that is very dirty.
Dirty chains should be cleaned before they are lubricated, e.g. by washing
with solvent such as diesel or petrol.
The chain should be blown dry using compressed air and lubricated directly
after cleaning.
Note:
Exercise care with degreasing agents as these can contain abrasives.
https://www.forkliftpdfmanuals.com/

CESAB S210 Specifications

General

Brand	CESAB
Model	S210
Category	Trucks
Language	English