© Cesab 16 – 19 T Code(s): 841, 842, 843
Repair manual: Mast C7000 Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
16.6 Replacing the idler roller
Remove the mast, and place it on a pallet or similar
1: Use a puller to remove the roller.
Make a note of the number of shims.
2: Install the roller, fit the same number of shims as were installed before.
Make sure the guides can move freely and the there is not too much play
before you install the mast in the truck.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
