© Cesab 5 – 8 T Code(s): 841, 842, 843
Repair manual: Parameters Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
Parameter 103 - Start-up display
#103 - Start-up display
Sets which value is shown on the display when the truck is started.
When the truck is started, one of the truck's 5 values is shown on the hour
meter display "H" (hour meter display) for 5 seconds. After the menu has
disappeared, the battery capacity is continuously shown in the numeric field
at the same time as the battery indicator is lit.
The truck control system stores five different time values. "Value 2 -
Operating time" is the default value on the start-up display.
Par. Description Min.
Defa
ult
Max.
Incre
ment
Unit
103 Start-up display 1 2 5 1
Hour meter values Display
Value 1 = (A) Key time
The total time the truck has been in use
Value 2 = (B) Operating time
Combined time during which the pump or drive motor has
been in operation.
Default display.
Value 3 = (C) Drive motor time
The total time the drive motor has been in operation.
Value 4 = (D) Pump motor time
Total time the pump motor has been in operation.
Value 5 = (S) Remaining time until next service.
Parameter 101 controls the initial value.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
