© Cesab 16 – 2 T Code(s): 841, 842, 843
Repair manual: Mast C7000 Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
16.1.2 Maintenance
Fixing point
According to the maintenance chart, the mast mounting bolts (a) should only
be visually inspected and not re-tightened on inspection. If the mast needs to
be replaced or if the bolts have come loose, then be sure to use new bolts and
washers. The tightening torque should be according to the torque table.
Lubrication
Lubricating the beam
1 The inside of the beam flanges are lubricated with (Q8
Rembrandt EP2).
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
