CESAB S210 - Function and Safety Checks Before Use

© Cesab 6 – 9 T Code(s): 841, 842, 843
Repair manual: Installation and commissioning Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
6.8 Function and safety checks
Prior to putting the truck into use, check the following items:
Pos. Inspection point Procedure
a Driving control Check the function
b Safety reversing switch Check the function
c Sound signal Check the function
d Control units Check the function
e Brake Check the function
f Emergency switch off Check the function
g Hydraulic system Check all components
h Power pack Check for any noise or oil leakage
j Wheels Inspect for any damage, remove dirt etc.
k Chassis Inspect for any damage, remove dirt etc.
m Battery cover and lock Check the function
n Battery Inspect the battery acid level and charge level
o Fork carriage Inspect for any damage, remove dirt etc.
p Support arms Inspect for any damage, remove dirt etc.
q Mast Inspect for any damage, remove dirt etc.
a,e
b
c
d
f
g
h
j
j
k
m
n
o
p
q
https://www.forkliftpdfmanuals.com/