© Cesab 5 – 43 T Code(s): 841, 842, 843
Repair manual: Parameters Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
Parameter 1102 - Controls for hydraulic function
#1102 - Controls for hydraulic function
Note: The rear one means the control towards the operator
Par. Description Min.
Defa
ult
Max.
Incre
ment
Unit
1102 Controls for hydraulic function 1 1 4 1
Value Function
1
The rear lifting and lowering control is connected
to the second hydraulic function, while the front
control is connected to the first hydraulic function
2
The rear lifting and lowering control is connected
to the first hydraulic function, while the front
control is connected to the second hydraulic
function
3
Both lifting and lowering controls are connected
to the first hydraulic function. There is no second
hydraulic function.
4
The analogue lifting and lowering control is
connected to the first hydraulic function, while the
front control is connected to the second hydraulic
function.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
