© Cesab 11 – 7 T Code(s): 841, 842, 843
Repair manual: Drive gear 2550 Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
11.6 Lubrication the steering bearings (Option)
1: Turn the steering wheel to the end position.
2: Press in some grease, not so much that the seal lifts, check the seal at
the grease nipple position.
3: Turn the wheel about 15 degrees, press in some more grease, continue
to the other end position.
4: Do the same with the other grease nipple to lubricate the entire bearing.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
