© Cesab 11 – 8 T Code(s): 841, 842, 843
Repair manual: Drive gear 2550 Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
11.7 Checking and changing the oil
11.7.1 Draining oil
1: Undo and remove the oil plug on the lower part of the gear housing.
2: Drain all old oil into a suitable receptacle.
3: Clean away dirt and metal shavings from the oil plug before fitting.
Step 1 Step 2
Step 3 T=20 Nm
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
