© Cesab 18 – 3 T Code(s): 841, 842, 843
Repair manual: Accessories Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
18.4 DC/DC converter
The truck can be equipped with a DC/DC converter to supply power to equipment
such as a PC, scanner, etc. The converter on the input side is protected against
polarity reversal, short circuit and thermal overload. The chassis is not live, and
the in/outputs are galvanically separated. The output sits on the E-bar profile.
18.5 Collision sensor
If a collision sensor is installed on the CAN bus, this registers when the truck
bumps against something. If an impact exceeds a certain level, specified by
parameters 105 and 106, this is counted as a collision.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
