CESAB S210 User Manual

© Cesab 15 – 5 T Code(s): 841, 842, 843
Repair manual: Hydraulic system 6000 Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
15.3.1 Emptying the hydraulic tank
1. Loosen all cables and tubes to the hydraulic unit.
2. Loosen the hydraulic unit from the truck by releasing the clamps that
surround the pump motor.
3. Loosen the tank from the hydraulic unit by loosening screw (f).
15.3.2 Hydraulic system, bleeding
Cylinders with bleeding valve
1. Loosen all bleeding screws 2 revolutions.
2. Lift slowly at a constant rate until the forks begin to rise (30-40 cm).
3. Close the bleeding screws.
4. Lower the forks and continue to press the lowering button for 10-15 s.
5. Top up with oil.
6. Lift the forks to max.
7. Lower and check the oil level.
Cylinders without bleeding valve
1. Lift slowly at a constant rate until the forks begin to rise.
2. Lower the forks and continue to press the lowering button for 10-15 s.
3. Repeat a couple of times.
4. Fill with oil.
5. Lift the forks to max.
6. Lower to min.
7. Allow to stand approx. 30 min (info for customer).
https://www.forkliftpdfmanuals.com/

CESAB S210 Specifications

General

Brand	CESAB
Model	S210
Category	Trucks
Language	English