© Cesab 24 – 5
T Code(s):
841, 842, 843
Repair manual:
Technical data
Model(s):
S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number:
7588857-040
Date:
2018-05-01
Applies from serial number:
6384351-
Wheels
Drive wheel, mm 230
Wheel pressure (kg/mm²) 0.24 0.24 0.27
Axle pressure without load, kg 450 450 570
Axle pressure at rated load, kg 450 450 570
Wheel bolts tightening torque, Nm 81±19
Support arm wheels, mm 125
Axle pressure without load, kg 265 265 215
Axle pressure at rated load kg 1345 1525 1155
Castor wheel, mm 85
Axle pressure without load, kg 220 220 100
Axle pressure at rated load, kg 340 360 360
Hydraulic system
Power, kW 2.2
Duty factor, % S2,60 min
Min. carbon brush length, mm -
Min. commutator thickness/
diameter, mm
-
Pressure at rated load, bar
See section “24.4 Overflow pressure for mast”.Overflow pressure, bar
Pump flow, litres/minute
Tank volume, litres 4.5
Hydraulic oil See section “23.2 Lubricants specification”.
Fuses
Drive motor circuit, A 125
Pump motor circuit, A 125
Control circuit, A 7.5
Model S212L S214L S220D
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
