CESAB S210 - Page 98

© Cesab 7 – 12 T Code(s): 841, 842, 843
Repair manual: Maintenance Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
Truck area Pos. Measure 750h/12m Time
expen
diture
6000 Hydraulic
system
a Check wear on hoses and pipes. X
16
minutes
b Check the oil level.
(Recommended window for the oil level
when forks are lowered according to
illustration)
X
c Check the mounting of the hydraulic unit. X
d Inspect the hydraulic system for possible
leakage.
X
e Change the oil and clean the oil tank.
Note: Initially after 750 h/12 m, then every
4500 h/36 m.
X
f Clean the oil strainer.
Note: Initially after 750 h/12 m, then every
4500 h/36 m.
X
6600 Lift cylinder
g Inspect the lifting cylinder for leakage. X
h Inspect the lifting cylinder for correct
mounting
X
j Inspect the lifting cylinder (support arm lift)
for leaks
X
k Inspect the cylinder (support arm lift) for
correct mounting
X
a,c,d,e,f
b
g,h
j,k
20 mm
https://www.forkliftpdfmanuals.com/