3.1.13-98
CS35 2013.04
3.1.13-98Electronic Control System - ME7
P1336
Electronic throttle safety monitoring torque
limit function
Refer to: DTC P1336, P1545, P1558,
P1568
P1545
The difference between the actual electronic
throttle position and the target position
exceeds the limit
P1558 Too large electronic throttle open resistance
P1568 Too large electronic throttle return resistance
P0606
Electronic throttle safety monitoring malfunc-
tion
Refer to: DTC P0606, P1559, P1564,
P1565, P1579, P1604
P1559 Self - learning steps fault of electrical throttle
P1564
The system voltage does not meet the elec-
tronic throttle self - learning conditions
P1565
Initialization self - learning fault of the lower
limit position of the electronic throttle
P1579
Not meeting self - learning conditions of elec-
trical throttle
P1604
Electronic throttle gain adjustment self - learn-
ing fault
P1610
Not programming error of Secret Key and
Security Code
Refer to: DTC P1610, P1626, P1631
P1626
Anti - theft authentication communication error
or no response of the anti - theft device
P1631 Anti - theft validation failure
P2106 Electronic throttle dirve level fault
Refer to: DTC P2106
P2122
Electronic accelerator pedal position sensor 1
signal voltage too low
Refer to: DTC P2122, P2123, P2138
P2123
Electronic accelerator pedal position sensor 1
signal voltage too high
P2138
Unreasonable electronic accelerator pedal
position sensor signal
P2127
Electronic accelerator pedal position sensor 2
signal voltage too low
Refer to: DTC P2127, P2128, P2138
P2128
Electronic accelerator pedal position sensor 2
signal voltage too high
P2138
Unreasonable electronic accelerator pedal
position sensor signal
Fault Code Description Diagnosis Procedures
mashinesoft.com
09120146259