CS35 2013.04
3.1.13-233 3.1.13-233Electronic Control System - ME7
DTC P0606, P1559, P1564, P1565 , P1579, P1604
1. DTC Description
2. Possible Sources
Fault Code Description Definition
P0606
Electronic throttle safety monitor-
ing malfunction
The opening of the electronic throttle is controlled by
ECM directly and the motor controls the opening of the
drive valve plate through the deceleration gear mecha-
nism. ECM controls the actuator motor connector E23
terminal 1 and 4 through the wiring harness connector
E01 terminal 66 (or 67) and 64 (or 65) respectively.
P1559
Self - learning steps fault of electri-
cal throttle
P1564
The system voltage does not meet
the electronic throttle self - learning
conditions
P1565
Initialization self - learning fault of
the lower limit position of the elec-
tronic throttle
P1579
Not meeting slf - learning condi-
tions of electrical throttle
P1604
Electronic throttle gain adjustment
self - learning fault
Fault
Code
Test Tactics
Setting Conditions (Control
Strategy)
Fault
P0606
Rationality inspection
Electronic throttle safety monitor-
ing malfunction
• Circuit
•ECM
P1559
Idle control, self - adaption learn-
ing lose efficacy
P1564
Idle control, self - adaption sys-
tem low voltage
P1565
Idle control, electronic throttle
lower limit location can not be
reached
P1579
Idle control self-adaption can not
be enabled
P1604 ECM internal monitoring
Electronic throttle gain adjust-
ment self - learning fault
mashinesoft.com
09120146259
To Next Page
Loading...
Need help?
General
