Changan CS35 User Manual

3.1.13-258
CS35 2013.04
3.1.13-258Electronic Control System - ME7
Post-Catalytic Oxygen Sensor
Special Tool
Removal
Installation
1. To install, reverse the removal procedure.
Oxygen Sensor Sleeve
CA301-022
1. Disconnect the battery negative cable.
Refer to: Battery Inspection (3.1.10 Charg-
ing System, General Procedures).
2. Disconnect the post-catalytic oxygen sensor
wiring harness connector.
3. Remove the post-catalytic oxygen sensor
with the oxygen sensor sleeve.
Torque: 50 Nm
Special Tool: CA301-022
CA301-022
A3113154
A3113155
mashinesoft.com
09120146259

Changan CS35 Specifications

General

Brand	Changan
Model	CS35
Category	Automobile
Language	English