Changan CS35 User Manual

3.1.13-218
CS35 2013.04
3.1.13-218Electronic Control System - ME7
DTC P0219, P0602, P0604, P0605
1. DTC Description
2. Possible Sources
3. Diagnosis Procedures
Fault Code Description Definition
P0219
The engine speed exceeds the
maximum speed limit
ECM internal program processing error and abnor-
mal ECM power supply and grounding
P0602
Electrical control unit coding
fault
P0604 Electrical control unit RAM fault
P0605 Electrical control unit ROM fault
Fault
Code
Test Tactics
Setting Conditions (Control
Strategy)
Fault
P0219
• Control unit
EEPROM fault.
• Diagnosis the
diagnosis data
identification code
pro gramme diag-
nosis.
-
•ECM
• Circuit
P0602
P0604
P0605
Test Conditions Details/Results/Actions
1. Inspect the DTC
A. Connect the diagnostic tool to fault diagnosis
interface.
B. Turn the ignition switch to position "ON".
C. Diagnose the engine system.
Is there any DTC besides P0219, P0602, P0604,
P0605?
Y
Repair the DTC besides P0219, P0602, P0604,
P0605.
Refer to: DTC Diagnostic Procedure Index
(3.1.13 Electrical Control System - ME7,
DTC Diagnosis and Testing).
N
Go to step 2.
mashinesoft.com
09120146259

Changan CS35 Specifications

General

Brand	Changan
Model	CS35
Category	Automobile
Language	English