Changan CS35 User Manual

CS35 2013.04
3.1.13-17 3.1.13-17Electronic Control System - ME7
General Procedures
General Tool
DTC Read Program
1. Carry out necessary vehicle preparation and
appearance inspection.
2. Connect the diagnostic tool to the diagnosis
interface in the cab.
3. Use the diagnostic tool to diagnose the
trouble codes DTC.
Data Stream Read Program
1. Carry out necessary vehicle preparation and
appearance inspection.
2. Connect the diagnostic tool to the diagnosis
interface in the cab.
3. Use diagnostic tool to access to the engine
system to read the data stream.
Actuation Component Test Pro-
cedure
1. Carry out necessary vehicle preparations and
appearance inspections.
2. Connect the diagnostic tool to the diagnosis
interface in the cab.
3. Use the diagnostic tool to access to the active
tests menu, carry out the components testing
that is needed.
Changan Auto Special Diagnostic Tool
Digital Multimeter
A3113026
A3113026
mashinesoft.com
09120146259

Changan CS35 Specifications

General

Brand	Changan
Model	CS35
Category	Automobile
Language	English