Changan CS35 User Manual

CS35 2013.04
3.1.13-45 3.1.13-45Electronic Control System - ME7
4. Inspect the spark plug
A. Remove the spark plug.
B. Inspect the spark plug in each cylinder and whether
the model and clearance meet the standard.
Refer to: Spark Plug Test (3.1.8 Ignition
System, General Procedures).
Is the spark plug in each cylinder normal?
Y
Go to step 5.
N
Replace the spark plug.
5. Inspect the fuel injector
A. Remove the fuel injector.
B. Use fuel Injector dedicated cleaning analyzer
inspects the fuel injector for leakage, blockages or
the phenomenon of flow out of tolerance.
Is the fuel injector normal?
Y
Go to step 6.
N
Replace the fuel injector.
6. Inspect the fuel
Is the fault caused by just refueling?
Y
Replace fuel.
N
Go to step 7.
7. Inspect the air intake pressure sensor and the throttle position sensor
A. Turn the ignition switch to position "LOCK".
B. Connect the diagnostic tool.
C. Start the engine and inspect the data stream of the
air intake pressure sensor and the throttle position
sensor.
Is the data stream of the air intake pressure sensor
and throttle sensor normal?
Y
Go to step 8.
N
Replace the air intake pressure sensor and throttle
sensor or repair sensor circuit.
Test Conditions Details/Results/Actions
mashinesoft.com
09120146259

Changan CS35 Specifications

General

Brand	Changan
Model	CS35
Category	Automobile
Language	English