Page | 97
SOFTWARE UPDATES [CONTINUED]
User Interface
(Continued)
A recovery mode is built-in to the camera in the case that a software update has
failed, or the user wishes to exit headless mode and restore the factory user
interface.
To enter recovery mode:
1. Shut the camera down.
2. Press-in and hold both the shutter button and the rotary encoder wheel.
3. Boot the camera by pressing the power button.
4. Release the shutter button and rotary encoder wheel once the Chronos
logo is shown.
5. The Software Updates screen will be shown after a few seconds.
Applies the selected User Interface.
Opens a list of Debian Linux software packages that are currently installed on
the camera, along with a description of the function of each package.
Causes a soft reboot of the camera.
Exits the Software Update tool and reloads the camera’s user interface and
video system.
NOTE: Kron Technologies provides source code for many of the camera’s software components,
which can be found at https://github.com/krontech.
To Next Page
Loading...
