CipherLab CP30 - Page 164

155
Appendix II Laser (SE955)
UCC coupon extended
code
Read UPC-A barcodes starting with digit "5", EAN-13
barcodes starting with digits "99", and UPC-A/GS1-128
Coupon Codes.
 UPC-A, EAN-13, and GS1-128 must be enabled first!
 Use “Addon Redundancy” to control
auto-discrimination of the GS1-128 (right half) of a
coupon code.
No
UPC ---
UPC-A/UPC-E/UPC-E1 For the default value, the UPC-A and UPC-E are enabled.
Enable Addons Decide whether to decode EAN-8, EAN-13, UPC-E0,
UPC-E1, UPC-A with addons.
 Ignore Addons
 Decode Only With Addons
 Auto-discriminate
Ignore…
Addons redundancy When “Auto-discriminate” is applied, decide the number of
times (2~30) of supplementary decoding the same
barcode that makes a valid reading.
10 times
Transmit Check Digit Decide whether to include the UPC-A/UPC-E/UPC-E1 check
digit in the data being transmitted.
Yes
Convert to UPC-A The UPC-E0/UPC-E1 barcode will be expanded into UPC-A,
and the next processing will follow the settings configured
for UPC-A.
No
UCC coupon extended
code
Read UPC-A barcodes starting with digit "5", EAN-13
barcodes starting with digits "99", and UPC-A/GS1-128
Coupon Codes.
 UPC-A, EAN-13, and GS1-128 must be enabled first!
 Use “Addon Redundancy” to control
auto-discrimination of the GS1-128 (right half) of a
coupon code.
No
Transmit Preamble Decide whether to include the UPC-A/UPC-E/UPC-E1
preamble System Character (and Country Code) in the
data being transmitted.
System
Character