CipherLab CP30 - Page 163

154
CP30 Mobile Computer Reference Manual
Check digit algorithm
One Check Digit Single Modulo 10
Two Check Digits
 Mod 10/Mod 11
 Mod 10/Mod 10
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
No
Select Length
(min/max)
 One or two fixed lengths
 Range (1~55)
4~55
GS1 DataBar (RSS) ---
GS1 Databar-14 GS1 DataBar-14 is short for GS1 DataBar Omnidirectional.
T
his group consists of (1) GS1 DataBar Omnidirectional,
(2) GS1 DataBar Truncated, (3) GS1 DataBar Stacked, and
(4) GS1 DataBar Stacked Omnidirectional.
Enable
GS1 Databar Limited Enable
GS1 Databar Expanded
T
his group consists of (1) GS1 DataBar Expanded, and (2)
GS1 DataBar Expanded Stacked.
Enable
Convert RSS to
UPC/EAN
“Convert to UPC/EAN” only applies to GS1 Databar-14 and
GS1 Databar Limited barcodes not decoded as part of a
Composite barcode.
Convert to EAN-13
Strip the leading “010” from barcodes.
 “01” is the Application ID and must be followed by a
single zero (the first digit encoded)
Convert to UPC-A
Strip the leading “0100” from barcodes.
 “01” is the Application ID and must be followed by
two or more zeros (but not six zeros)
No
EAN/JAN ---
Enable EAN-8 Enable
Enable EAN-13 Enable
Bookland EAN (ISBN) The EAN-13 barcode starting with 978 will be converted to
ISBN.
Enable
Enable Addons Decide whether to decode EAN-8, EAN-13, UPC-E0,
UPC-E1, UPC-A with addons.
 Ignore Addons
 Decode Only With Addons
 Auto-discriminate
Ignore…
Addons redundancy When “Auto-discriminate” is applied, decide the number of
times (2~30) of supplementary decoding the same
barcode that makes a valid reading.
10 times
EAN-8 extend No