CO
2
Emissions Tariff 1
CO
2
Emissions Tariff 2
CO
2
Emissions Tariff 3
Total CO
2
Emissions, ∑
Consumption and generation values
No. of hours Tariff 1
No. of hours Tariff 2
No. of hours Tariff 3
Total No. of hours, ∑
Symbols T1, T2 and T3 on the display indicate the three tariffs available on the device.
The selected tariff is indicated at the bottom right of the display.
5.3.- USER PROFILE
This profile is identified with the symbol at the top of the screen (Figure 38).
Figure 38: Screen of the CVM-C11 with the user profile.
This profile displays the screens selected in the programming menu (“6.14.- SELECTING THE OPERATION
PROFILE”).
Note: If you have not selected the display of any screen, the device will restart and display the
Phase-Neutral Voltage screen by default.
The voltage and current harmonics are also displayed, up to the 31st order harmonic, for each of the
lines, L1, L2 and L3 (“5.4.- HARMONICS.”).
54
CVM-C11
Instruction Manual
To Next Page
Loading...
