Configuration values
Table 60:Configuration values: Operating mode of digital input 2.
Operatinf mode of digital input 2
Possible values
LoGic Logic input
tAriFF Tariff selection.
Press key to access the next programming step.
6.31.- RS-485 COMMUNICATIONS: PROTOCOL
The RS-485 communications protocol is selected on this screen.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 61:Configuration values: RS-485: Protocol.
RS-485: Protocol
Possible values
Modbus
BACnet
(8)
(8)
Not available for model CVM-C11-ITF-IN-ETH-ICT2.
Note: The device will restart after exiting the setup menu if the RS-485 communications parameters
have been modified.
Press key to access the next programming step.
86
CVM-C11
Instruction Manual
To Next Page
Loading...
