Circutor CVM-C11 - 6�39�- Bacnet PROTOCOL: MAC ADDRESS

To enter or modify the value, press the key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key to
modify the other values.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 67:Configuration values: BACnet, device ID.
BACnet: Device ID
Minimum value 0
Maximum value 999999
Press key to access the next programming step.
6.39.- BACnet PROTOCOL: MAC ADDRESS
Note: Not available for model CVM-C11-ITF-IN-ETH-ICT2.
Note: Screen visible if the BACnet protocol has been programmed, “6.31.- RS-485 COMMUNICATIONS:
PROTOCOL”.
The MAC address is programmed on this screen.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
To enter or modify the value, press the key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key to
modify the other values.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
To validate the data, press for 3 seconds and the icon will disappear from the display.
91
Instruction Manual
CVM-C11