Circutor CVM-C11 - 6�29�- Operating Mode of Digital Input 1; 6�30�- Operating Mode of Digital Input 2

6.29.- OPERATING MODE OF DIGITAL INPUT 1
The function of digital input 1 is selected on this screen.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
Configuration values
Table 59:Configuration values: Operating mode of digital input 1.
Operating mode of digital input 1
Possible values
LoGic Logic input
tAriFF Tariff selection.
PuLSe Maximum Demand Synchronism Pulse
Note: When generating the synchronism pulse of the Maximum Demand, the device restarts the
calculation of the maximum demand.
Press key to access the next programming step.
6.30.- OPERATING MODE OF DIGITAL INPUT 2
The function of digital input 2 is selected on this screen.
Press key for 3 seconds to edit the value. The icon appears at the top of the screen.
The key jumps between the possible options.
To validate the data, press for 3 seconds and the icon will disappear from the display.
85
Instruction Manual
CVM-C11